R&G tail tidy

hi folks,

just bought an R&G tail tidy for my 05 z750 from ebay. looks like it should not be too hard to fit, but my main concern is that the brackets that accept the indicators are set so far in that i dont think a normal indicator will stick out far enough to be seen once the number plate is on. the stalk on the indicator would need to be around 8cm long to allow the head to show, and i’m not sure you can get any that long?!?!

other option is obviously get a smaller plate, but was hoping to avoid that.

anyone got any experience of these things they can offer?

many thanks.

Had this when I fitted a tail tidy to my ZX636. Was ordering smaller indicators anyhow but had to order long stem ones to clear my plate which as it happens was a 7" X 5" anyhow, I think the std size plate would’ve obscured about half the ‘normal’ indicators. I know they’re not the greatest quality but Motrax do a large range of indicators including long stem ones. :slight_smile:
Edited because I just remembered that i also had the problem that the std indicators wouldn’t fit through the holes in the tail tidy so would’ve had to get different ones anyway.

guess i’ll need to order a 7" x 5" plate then, and hope i don’t get a ticking off from the local constabulary for it…

any recommendations on where to get a plate from? i guess all the internet sites are much of a muchness…

thanks for the reply

Theres a post on that very subject here: http://londonbikers.com/forums/Topic575087-58-1.aspx