Revolutionary Reevu Helmet Finally Goes On Sale
The final changes to the model before full production started include an adjustable mirror so the view can be tweaked to give as perfect a view to the rear as possible; different head sizes and shapes didn't always give the fullest view but now that shouldn't be a problem. The adjustments aren't for on the move though, so some time setting up the helmet before using it will be appropriate.
They've also added a clear screen over the rear viewport to help keep the lens clean of dust and rain drops, both of which will disperse better from the new visor than from the recessed lens previously.
Here's the current spec for the MSX1:
SAFETY
Maximum protection and safety are a REEVU helmet’s main requirements; shields are projected and manufactured with extremely evolved materials. “APC” is an exclusive technology to Reevu. Allowing complex shapes with tri composite material, capable of spreading impact power on the complete helmet surface. It grants an excellent degree of impact resistance.
IMPACT RESISTANCE, DIFFERENT SHIELDS / PADS
REEVU helmets are manufactured with 2 internal liners, 1 crumple zone absorption part, and external tri composite carbon shell. For the different sizes: the inner padding has a different thickness for all the sizes, which can be adjusted with accessory parts to add the bespoke fit and to add comfort and better impact properties.
HOMOLOGATION
REEVU helmet satisfies the main European homologation ECE-ONU 22-05. However, this helmet has surpassed many other standards and is awaiting certification once the demand in the European community subsides. This homologation involves extremely severe safety tests. The helmet is submitted to flexibility and bump resistance tests, simulating different impacts at different speeds. Power and length of the impact are measured, even at -20° and +50°, or in wet conditions and after extended UV ray exposure.
COMFORT
Each, REEVU helmet manufactured is hand assembled with perfectly integrated spare parts and special padding. This offers the wearer substantial softness for high quality comfort. In order to prevent dampness inside the helmet, a material covering is used that is able to absorb and expel perspiration. The fabric gives a pleasurable feeling, and is easily replaced and washable.
VENTILATION
Effective internal ventilation is fundamental for comfort and safety. Riding in maximum comfort and feeling relaxed allows the wearer to give all the attention to the street. REEVU helmets are equipped with a ventilation system projected and tested; air will come in across front positioned slots, above and below the visor, moves along many pipes and holes, and comes out across rear slots, positioned near the rear glass. Rider's head is kept fresh and dry even in torrid climate.
LOW NOISE
A major factor in the design of the helmet was to deliver a low noise solution to the many throbbing eardrums of motorbike helmet wearers. The unique design through wind tunnel testing has now prevailed to achieve that goal.
APC MATERIALS
- Ultra light shield, in composite materials, manufactured with evolved APC technology, allowing complex shape tri composite shells, capable of spreading impact load across the helmet surface. The shell is composed of carbon fibreglass, Kevlar and synthetic hi-tenacity advanced fibre, tied up from high-lengthening vinylester.
- Internal shells are made in dual density EPS, very light with a high coefficient bump absorption, creating a structure with different density in order to have more impact distribution.
- Polycarbonate ventilation slots, that together with the channeling on the inside shell, allow the air flow inside the helmet.
- Polycarbonate injected visor with high optical quality and easy refit.
- Completely removable and washable lining, for perfect comfort and cleanliness.
- Double D ring retention system.
APC
APC is the high performance technology used for external shields. APC is Advanced Performance Composite, with two main characteristics:
Strengthened layer composition
One of the peculiarities of APC is the shaping process. Generally a fibre helmet obtains its stability thanks to the polycarbonate material, soaked with combined material (as fibreglass) and heat hardened. The stability of the helmets depends on the quality of the materials and on the mutual affinity of them. APC allows to create an organic fibre structure, which is three dimensional formed, creating a lighter shield with more stability, containing superfluous material accumulation and no rejection during the shaping process.
Layer material
APC shield is composed by polycarbonate material, warmth hardened fibreglass layer and other organic fibres. Different light organic fibres are applied in appropriate positions, following the characteristics and design of the shell. An APC helmet has more lightness and flexibility, and the same stability.
QUALITY
REEVU helmet is manufactured with the most developed technology and is hand made assembled. All the production units are submitted to severe quality control. The helmets are submitted to a computerized test of bump absorption and material density. Obviously all the helmets are also visually checked, in order to grant a top quality level of painting and global quality. REEVU helmets are manufactured at factories, with ISO 9001/2000 certification (cert. SQ02923).
Londonbikers.com is very proud to say that Reevu have a new distributor in the shape of our Official LB Online Helmet Store - JustHelmets.co.uk, who aside from being a canny Geordie operation are always top value, give top service and indeed a healthy discount for LB members. Check out the General section in our Community forum for more details.
Howay the Lads!
